Using The External Navigation Unit - Kenwood DDX6031BT Instruction Manual

Using the external navigation unit

You can connect a navigation unit ( KNA-G630/KNA-G630CN: optional accessory) to the
navigation input terminal so that you can view the navigation screen. (☞ page 72 )
The navigation guidance comes out through the front speakers even when you listen to an
audio source.
To view the navigation
screen
On <Top Menu>:
On any screen:
The navigation screen is activated.
• While the navigation screen is displayed,
the touch panel operations are available
only for using navigation function.
• The aspect ratio of the navigation screen
is fixed to <FULL> regardless of the
<Aspect> setting (☞ page 38).
To cancel the navigation screen
DDX6031BT/
DDX6031BTM/
DDX6031/DDX6031M
Settings for navigation unit
1
On <Top Menu>:
32
DDX6031BT/DDX6031BTM/DDX6031/DDX6031M/DDX4031BT/DDX4031BTM/DDX4031/DDX4031M
or
DDX4031BT/
DDX4031BTM/
DDX4031/DDX4031M
2
3
Guidance Select front speakers
used for the navigation
guidance.
Volume Adjust the volume of the
navigation guidance. (0
to 35)
NAV Mute Select <ON> to
attenuate the sound
coming through
speakers other than the
front speakers during
navigation guidance.
NAV Setup Press [Enter] to display
the setup screen for
the navigation unit.
See the instruction
manual supplied for the
navigation unit.