Kenwood DDX7015BT Instruction Manual page 64

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting wires to terminals (DDX715WBT/DDX715WBTM)
USB terminal (0.8 m):
Pages 65 – 66
Page 66
Connect the antenna
cord to the antenna
terminal.
1
*
Blue with white stripe
(Power control wire)
Brown (Mute control wire)
* If no connections are made, do not let the cable come out from the tab.
64
6
Page 66 Pages 65 – 66
Page 67
When using the optional power amplifier, connect to
its power control terminal.
Not used.
Connector B
Connect to vehicle's harness.
Connect to vehicle's harness.
Connector A
Connector C
Purple with white stripe
(Reverse sensor wire)
Light green (Parking
sensor wire)
10 A fuse
Pin Color and functions of Connector A, B, and C
A1 Orange/White
A2 Yellow
A4 Red
A5 Blue
A6 Black
White ª / White/Black ·
A8/A7
A10/A9 Gray ª / Gray/Black ·
Green ª / Green/Black ·
B2/B1
Purple ª / Purple/Black ·
B6/B5
C6 Gray/Red
C7 Light green/Red
C8 Purple/Red
Connect to the vehicle's steering remote harness.
• Depending on the type of vehicle, it cannot be
connected.
Connect to the vehicle's reverse lamp harness when
using the optional rear view camera.
Connect to the vehicle's parking
3
brake detection switch harness.
• For best safety, be sure to
connect the parking sensor.
Dimmer
Battery
Ignition (ACC)
Antenna control
Ground connection
Left speaker (front)
Right speaker (front)
Left speaker (rear)
Right speaker (rear)
Ground
Input 1
Input 2