Wireless Connection; Connecting External Components - Kenwood DDX7015BT Instruction Manual

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Connecting a Smartphone
Android, etc.
(with HDMI)
(commercially available)
Micro USB
Micro HDMI (Type D)
Micro USB to (optional accessory)*
USB cable
(commercially
Micro HDMI to HDMI
available)
adapter (commercially
available)
1.8 m
0.8 m
KCA-HD100
(optional accessory)
If you connect the HDMI/MHL connector, fix the HDMI/MHL
cable using the fixture (8) and screw (9).
8
9
HDMI/MHL cable
* Use conversion adapter to connect to smartphones if necessary.
66
Connecting the Miracast Dongle to
use smartphone/iPod/iPhone over a
Android, etc.

wireless connection

(with MHL)
(commercially available)
KCA-MH100

Connecting external components

1.8 m
1 Audio Video input (AV-IN1)
Miracast Dongle: KCA-WL100 2 AV-OUT/Video output (Yellow)
3 Rear view camera input (Yellow)
(optional accessory)
4 iPod/Audio Visual input (iPod/AV-IN2)*
5 NAVI I/F input
6 TV tuner remote control output
7 HDMI/MHL input
8 DAB antenna input*
9 Subwoofer preout (monaural output)*
p Rear preout*
q Front preout*
w Audio output (ø3.5 mini jack)
*
*
*
• Visual input (Yellow)
• Audio left input (White)
• Audio right input (Red)
2
• Subwoofer left output (White)
• Subwoofer right output (Red)
3
• Audio left output (White)
• Audio right output (Red)
3
• Audio left output (White)
• Audio right output (Red)
Resistance-free stereo type mini plug
When connecting the component to play on "AV-IN2", use the
1
Audio and Video cable CA-C3AV (optional accessory).
Only for DDX5015DAB. To install the Digital Radio antenna, see
2
page 67.
When connecting an external amplifier, connect its ground wire to
3
the chassis of the car; otherwise the unit may be damaged.
1
3