Kenwood DDX7015BT Instruction Manual page 19

iPod/iPhone iPod/iPhone
Bluetooth connection
Pair the iPod/iPhone through Bluetooth. (Page 39)
• For iPod nano (7th Generation)/iPod touch (5th
Generation)/iPhone 5S/iPhone 5C/iPhone 5: To
watch video, connect your iPod/iPhone to the
HDMI/MHL input terminal using KCA-HD100
(optional accessory). (Page 65 )
• For iPod/iPhone except for iPod nano (7th
Generation)/iPod touch (5th Generation)/iPhone
5S/iPhone 5C/iPhone 5: You cannot watch video
with a Bluetooth connection.
Selecting the iPod/iPhone device to
play and connection method
When connecting the iPod/iPhone device for
first time, the setup screen (for connection, etc.)
appears. Follow the procedure on the setup screen
to configure the settings.
1
Display the <iPod Settings> screen.
On the <TOP MENU> screen:
• If [Enter] for <iPod Setup> cannot be
selected, put the unit in standby. (Page 9)
2
• If you do not need to change the settings,
press [OK] to exit from the setup screen.
3
Select the connection method (1), then
press [Next] (2).
<USB +
Select this when the iPod/
AV-IN> iPhone is connected using
KCA-iP202 (optional accessory).
<USB 1 Wire> Select this when the iPod/
iPhone is connected using
KCA-iP102 (optional accessory)
or KCA-iP103 (optional
accessory).
<HDMI +
Select this when the iPod/
Bluetooth> iPhone is connected using
HDMI cable KCA-HD100
(optional accessory) and
KCA-iP103 (optional accessory)
through a Lightning-Digital AV
adapter (accessory of the iPod/
iPhone).
<Bluetooth> Select this when the iPod/
iPhone is connected via
Bluetooth.
• When selecting <USB + AV-IN> or <USB 1
Wire>, go to step 5.
Continued on the next page...
ENGLISH 19