Using The External Navigation Unit - Kenwood DDX6016BT Instruction Manual

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS

Using the external navigation unit

You can connect a navigation unit (KNA-G 630:
optional accessory) to the NAV input terminal so that
you can view the navigation screen. (Page 65 )
• The navigation guidance comes out of the front
speakers even when you are listening to an audio
source.
❏ Viewing the navigation screen
On the Home screen:
• Only for DDX6016BT/DDX6016BTM/DDX4016BT/
DDX316/DDX316M/DDX616WBT/DDX616WBTM:
You can also display the navigation screen by
pressing AV on the monitor panel while listening
to another source.
• While the navigation screen is displayed, the touch
panel operations are available only for navigation.
• The aspect ratio of the navigation screen is fixed
to <FULL> regardless of the <Aspect> setting
(Page 49).
36
When receiving a call during navigation
guidance (Only for DDX6016BT/DDX6016BTM/
DDX4016BT/DDX416BT/DDX416BTM/
DDX616WBT/DDX616WBTM)
The screen is switched automatically. To return to
the navigation screen, press [ ].
To exit the navigation screen
On the monitor panel (only for DDX6016BT/
DDX6016BTM/DDX4016BT/DDX316/DDX316M/
DDX616WBT/DDX616WBTM):
Press AV on the monitor panel.
On the pop-up short-cut menu (Page 13):
Display the pop-up short-cut menu by pressing
MENU on the monitor panel, then select [Current
Source].
❏ Settings for the navigation unit
1
Display the <Input> setting screen.
On the Home screen:
2
Display the <Navigation> screen.
3
<Guidance> Select which front speakers
are used for the navigation
guidance.
<Volume>
Adjust the volume of the
navigation guidance. (0 to 35)
<NAV Mute> Select [ON] to attenuate the
sound coming out of speakers
other than the front speakers
during navigation guidance.
• To cancel the attenuation,
select [OFF].
<NAV Setup> Press [Enter] to display
the setup screen for the
navigation unit. See the
instruction manual supplied
for the navigation unit.