Kenwood DDX7015BT Instruction Manual page 68

CONNECTION/INSTALLATION CONNECTION/INSTALLATION
Determining the antenna installation
location
• The direction of the film antenna (0) changes
depending on whether it is installed on the right
side or left side.
• Be sure to check the installation location of
the film antenna (0) before installing. The film
antenna cannot be reattached.
• Install the antenna at least 100 mm away from
other antennas.
• Do not attach the amplifier unit (-) to the ceramic
line (black part) around the windscreen, as it will
not stick sufficiently.
Installing the antenna on the left side
Ceramic line (black part)
150 mm
Earth sheet*
30 mm
Installing the antenna on the right side
Ceramic line (black part)
150 mm
30 mm
68
* Attach the earth sheet of the amplifier unit (-) to the metal part
of the front pillar.
Installing the Digital Radio antenna

Caution
When installing the antenna cable inside a front
pillar that contains an air bag
• The front pillar cover is secured with a special
clip which may need to be replaced when it is
removed.
Contact your vehicle dealer for details on
removing the front pillar cover and availability of
replacement parts.
• Install the amplifier unit (-) above the air bag so
that it does not obstruct the operation of the air
bag.
Earth sheet*
Clip
Front pillar cover
Air bag
1
Remove the front pillar cover of your car.
Front pillar cover
2
Clean the windscreen with the supplied
cleaner (~).
– Wait until the glass surface is completely dry
before attaching.
– If the glass surface is cold, e.g. in winter,
warm it with the defroster or a hair dryer.
3
Remove the first sheet (tag 1) on the film
antenna (0) horizontally and attach the
antenna to the windscreen.
Sheet (tag 1)
Do not touch the adhesive side of the film
antenna (0).