TOHATSU BFT 250A Owner's Manual page 99
Hide thumbs
Also See for BFT 250A:
- Owner's manual (128 pages) ,
- Service manual (639 pages) ,
- Manual (43 pages)
Table of Contents
Advertisement
MAINTENANCE
WATER SEPARATOR
SUSPENSION
STRAP
ALIGNING MARK
11. Align the aligning mark as shown
in the figure, when installing the
suspension strap on the water
separator.
96
PROTRUDED PORTION
SUSPENSION STRAP
DRAIN JOINT
12. The drain joint should be
positioned within the protruded
portion of the suspension strap as
shown in the figure.
13. Prime the engine using the
priming bulb (see page 48).
Check for fuel leaks. Repair any
fuel leaks if necessary.
If the buzzer sounds, water or
sediment accumulation is found to be
caused by excessive water or
sediment accumulated in the fuel
filter, inspect the fuel tank. Clean the
fuel tank if necessary.
Advertisement
Table of Contents
