Stopping The Engine; Emergency Engine Stop; Normal Engine Stop - TOHATSU BFT 250A Owner's Manual

Emergency Engine Stop

(R1 type)
EMERGENCY STOP
SWITCH LANYARD
STOP
EMERGENCY
STOP SWITCH
CLIP
(R2, R3 type)
EMERGENCY STOP SWITCH
LANYARD
Pull the curl cord of the emergency
stop switch and remove the lock plate
from the switch; this will stop the
engine.
It is a good idea to stop the engine
with the emergency stop switch
lanyard from time to time to be sure
that the emergency stop switch is
operating properly.

Normal Engine Stop

NEUTRAL
(R1 type)
REMOTE
CONTROL
LEVER
1. Move the shift lever to NEUTRAL
position.
After sailing with the throttle fully
open, cool down the engine by
running it at the idle speed for a few
minutes.

9. STOPPING THE ENGINE

NEUTRAL
NEUTRAL
REMOTE
CONTROL
LEVER
(R2 type)
NEUTRAL
REMOTE
CONTROL
LEVER
(R3 type)
NEUTRAL
NEUTRAL
75