Handling The Camera; Charging The Battery; Using The Power Supply To Charge The Battery; Using The Stand-Alone Battery Charger To Charge The Battery - FLIR T6 series User Manual

13

Handling the camera

13.1 Charging the battery

Note
You must charge the battery for 4 hours before you start using the camera for the first time.

13.1.1 Using the power supply to charge the battery

13.1.1.1 Procedure

Follow this procedure:
1. Connect the power supply cable plug to the power connector on the camera.
2. Connect the power supply mains-electricity plug to a mains socket.
3. Disconnect the power supply cable plug when the green light of the battery condition
LED indicator is continuous.

13.1.2 Using the stand-alone battery charger to charge the battery

13.1.2.1 Explanation
Type of signal
The blue LED flashes.
The blue LED glows continuous.
13.1.2.2 Procedure
Follow this procedure:
1. Put the battery in the battery charger.
2. Connect the power supply cable plug to the connector on the battery charger.
3. Connect the power supply mains-electricity plug to a mains socket.
4. Disconnect the power supply cable plug when the blue LED on the battery charger is
continuous.

13.2 Turning on the camera

13.2.1 Procedure
Follow this procedure:
1. To turn on the camera, push and release the

13.3 Turning off the camera

13.3.1 Procedure
Follow this procedure:
1. To turn off the camera, push and hold the
#T559880; r.15724/15724; en-US
Explanation
The battery is being charged.
The battery is fully charged.
button.
button for more than 0.2 second.
23