Working With Image Modes; General; Image Examples - FLIR T6 series User Manual

15

Working with image modes

15.1 General

The camera captures both thermal and visual images at the same time. By your choice
of image mode, you select which type of image to display on the screen.
The camera supports the following image modes:
• Thermal MSX (Multi Spectral Dynamic Imaging): The camera displays infrared images
where the edges of the objects are enhanced with visual image details.
• Thermal: A full infrared image is displayed.
• Picture in picture: An infrared image frame is displayed on top of the visual image.
• Digital camera: The visual image captured by the digital camera is displayed.
Note
These image modes only work correctly for calibrated lenses. The lens that ships with the camera is
factory calibrated. To have a new lens calibrated, you must send in the camera and the lens to your lo-
cal service department.

15.2 Image examples

This table explains the different types of image modes.
Image mode
Thermal
Thermal MSX
#T559880; r.15724/15724; en-US
Image
39