Handling The Camera; Charging The Battery; General; Using The Stand-Alone Battery Charger To Charge The Battery - FLIR E Series User Manual

7

Handling the camera

7.1 Charging the battery

7.1.1 General

• Before starting the camera for the first time, charge the battery for 2 hours using the
stand-alone battery charger.
• Select a mains socket that is near the equipment and easily accessible.

7.1.2 Using the stand-alone battery charger to charge the battery

1. Put one or two batteries in the battery charger.
2. Connect the power supply cable plug to the connector on the battery charger.
3. Connect the power supply mains-electricity plug to a mains socket.
4. When the white LED on the battery charger glows continuously, the batteries are fully
charged.
5. It is good practice to disconnect the stand-alone battery charger from the mains
socket when the batteries are fully charged.
7.1.2.1 Stand-alone battery charger LED indicator
Type of signal
The white LED flashes.
The white LED glows continuously.

7.1.3 Using the USB battery charger to charge the battery

1. Put the battery into the battery compartment of the camera.
2. Connect the USB battery charger to a mains socket.
3. Fold up the rubber cover at the top of the camera.
#T810587; r. AA/74078/74713; en-US
Explanation
The battery is being charged.
The battery is fully charged.
17