Table of Contents
Advertisement
Your WAN IP Address will be listed here.
3. Open/set Virtual Server Ports to enable remote image viewing
The firewall security features built into the rout er and most routers prev ent users from accessing
the video from the device over the Inte rnet. The router connects to the Internet over a serie s of
numbered ports. The ports normally used by the device are blocked from access over the Internet.
Therefore, these ports need to be made accessible over the Internet. This is accomplished using
the Virtual Server function on the router. The Virtual Serv er ports used by the came ra must be
opened through the router for remote access to your camera.
Follow these steps to configure your router's Virtual Server settings
Click Enabled.
Enter a unique name for each entry.
Select Both under Protocol Type (TCP and UDP)
Enter your camera's local IP Address (e.g., 192.168.0.100, for example) in the Private
IP field.
If you are using the def ault camera port settings, enter
Private Port section, click Add.
A check mark appearing before the entry name will indicate that the ports are enabled.
User's Manual of ICA-2200
79
80 into the Public and
Advertisement
Table of Contents
