Table of Contents
Advertisement
White Balance
Iris/Exposure
Control
Maximum Exposure
Time
Power Frequency
Color Level
Hue
Brightness
Contrast
Sharpness
3D De-Noise
ICR
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
This Camera is built-in a DC-Iris lens. User can choose the
Iris control mode from "Auto" or "Off". In case, the "Auto"
mode is selected, th
automatically. On the h and, if the "Off" mode is selected,
the Camera will open the lens Iris to maximize.
Sometimes, the Auto Iris may work abnormally under some
environments. In this case, user can click "Calibrate" button
to adjust Auto Iris function again.
User can limit the ma ximum exposure time of the image
sensor. The larger value means longer exposure time
possibly.
Frequency of power line: 50 or 60Hz.
Large value will be colorful.
Change the value will result to color tuning.
Large value will brighten camera.
Large value will contrast camera heavily.
Large value will sharpen camera.
3D De-Noise can remove or lower unwanted noise and
preserve fine details and edges.
Use built-in photo sensor or manual to control ICR.
In case use r selects manual mode, there are
Night (On), Day (Off), Auto or Schedule to control built-in IR
LEDs. This function is very useful under low illumination
environment even 0 Lux.
In case the Auto mode is selected, user needs to specify 3
parameters in advance:
Night Mode Threshold (0~10000): this valu e set the
threshold to turn on IR LED. It should be lower or equal t o
Day Mode Threshold.
Day Mode Threshold (0~10000): this value set the
threshold to turn off IR LED. It should be higher or equal to
42
User's Manual of ICA-2200
e Camera will control DC Iris
4 modes:
Advertisement
Table of Contents
