Ptz Setting - Planet ICA-2200 User Manual

6.2.3. PTZ Setting

This page allow user to modify the RS-485 interface according to the P/T scanner.
Camera Protocol
Camera Address
Baud rate
NOTE
This device can connect to a PTZ camera or speed dome camera and
controls them thru RS-485 interface.
This is the camera ID set in PTZ camera or speed dome camera.
Note that please DO NOT changes the default value if unnecessary.
If so, user needs to check and set value properly for both sides.
This is the communication speed between network module and P/T
scanner.
If need to ch ange these parameters, user n eeds to check and set
value properly for both, network module and P/T scanner.
45
User's Manual of ICA-2200