E-Mail Configuration - Planet ICA-2200 User Manual

6.7. E-Mail Configuration

You may setup SMTP mail param eters for further operation of Event Schedul e. That's, if users
want to send the alarm m essage out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
SMTP Server
Test
SMTP Port
SSL
SMTP Authentication
Authentication User
Name
Authentication Password
E-mail From
E-mail To
E-mail Subject
Type the SMTP server name or the IP address of the SMTP server.
Send a test mail to mail server to check this account is available or
not.
Set port number of SMTP service.
Enable SSL function or not.
Select the authentication required when you send an e-mail.
Disable: If no authentication is required when an e-mail is send.
Enable: If authentication is required when an e-mail is sent.
Type the user name for the SMTP server if Authentication is Enable.
Type the password for the SMTP server if Authentication is Enable.
Type the sen der's E-mail address. This address is use d for repl y
e-mails.
Type the receiver's e-mail address.
Type the subject/title of the e-mail.
57
User's Manual of ICA-2200