Deregistering / Registering A; Dialling Pause - SSS Siedle Siedle Scope S 850-0 Operating Instructions Manual

Main menu
Settings
Door call
If there are several cordless handsets
registered to one base station, it is
possible to activate call silencing at
any of the cordless handsets in order
to ensure that you are not disturbed.

Deregistering / registering a

handset
In the Deactivate / Activate handset
menu, it is possible to register or
deregister cordless handsets at the
base station.
Registration is secured by the default
PIN 0000. If you have changed this
PIN, your own personal PIN must be
used to register.

Dialling pause

If you are operating the Siedle Scope
at a telephone system, you may
require an external line digit.
It may be necessary to leave a short
pause between dialling the prefix
and continuing with the call number.
The required pause is determined
by the customer's own telephone
system. There are three dial pause
times to choose from: 800 ms,
1600 ms and 3200 ms, or alterna-
tively no pause 0 ms.
Enter the dial pause individually at all
the cordless handsets.
Door call
Allow door call?
Yes No
OK Back
Deregister handset
Do you want to deregister
the handset?
Yes No
OK Back
Dialling pause
0 ms
800 ms
1600 ms
3200 ms
Save Back
Procedure:
• Select Door call in the System
menu using the lower control
button.
• Confirm by pressing the left-hand
display button OK.
• Using the right and left control
buttons, select Yes or No.
• Your selection is highlighted in
yellow.
• Confirm by pressing the left-hand
display button OK.
The following message appears in
the display: Door call enabled/
disabled.
• Select Deregister/register
handset in the System menu using
the lower control button.
• Confirm by pressing the left-hand
display button OK.
• Using the right and left control
buttons, select Yes or No.
• Your selection is highlighted in
yellow.
• Confirm by pressing the left-hand
display button OK.
Depending on the selection, the dis-
play shows the following message:
Registration succeeded
Deregistration aborted
and:
Would you like to register the
handset?
• Confirm by pressing the left-hand
display button OK.
Select Dialling pause in the System
menu using the lower control
button.
• Confirm by pressing the left-hand
display button OK.
• Now select the required length of
the dialling pause using the control
button.
• Your selection is highlighted by a
yellow frame.
• Confirm by pressing the left-hand
display button Save.
35