Table of Contents
Advertisement
Getting started
Telephony
Brokering
Brokering is used to describe the
process of switching backwards and
forwards between a door call and a
public network call.
Cordless handset
Idle status
In order to save power and to extend
the life of the battery, the display is
switched off in the idle status. The
display switches off automatically
around two minutes after the last
action.
As soon as a call is received or infor-
mation is transferred, the display is
automatically activated to the ready
status.
Charging cradle
The charging cradle of your Scope
cordless handset is used to charge
the battery and offers two additional
control buttons.
The control buttons are only opera-
tional and alight when the cordless
handset is placed in the charging
cradle and the charging cradle is
supplied with power through the
power supply unit.
Door release
• Accept the door or public network
call with the green Pick up button.
• By pressing the green Pick up
button again, you can accept the
second incoming call.
• The green Pick up button can be
used to switch backwards and for-
wards between the 2 active calls.
• By actuating the red End call
button, you can refuse the incoming
second call.
Note
If a display is in the power saving
mode, the first time a button is
pressed this only reactivates the dis-
play and has no other function.
Procedure:
• Without picking up the cordless
handset, accept the incoming call
using the Handsfree button on the
charging cradle.
• End the call by pressing the
Handsfree button again.
• Open the door using the Door
release button.
The front door or storey door is
opened, depending on where the
door call comes from, using the
Door release button with the key
symbol.
The front door can be opened using
the white Door release button even
if there is no incoming door call.
There is an additional Door release
button on the charging cradle.
However, this only works if the
cordless handset is located in the
charging cradle.
11
Advertisement
Table of Contents
