Control Device - SSS Siedle Siedle Scope S 850-0 Operating Instructions Manual

Main menu
Intercom settings
Door
Select this function type if the func-
tion is to be used to dial a door.

Control Device

Select this function type if the func-
tion is to be used to switch a control
device.
Function
Assignment to the required func-
tion number is carried out in the
Function submenu. The function
number must be identical with
the programmed value in the bus
programming software BPS 650-...;
in total up to 15 functions can be
programmed.
New entry
Name
Type
Door
Function
3
OK Back
New entry
Name
Type
Function
3
OK Back
New entry
Name
Type
Function
3
Save Back
• Select Door entry using the con-
trol buttons.
• Confirm by pressing the left-hand
display button OK.
• Select Control device entry using
the control buttons.
• Confirm by pressing the left-hand
display button OK.
The function number is pre-assigned
by your selection.
Select this using the lower control
button.
Now save your complete entry by
pressing the left hand display button
Save.
21