Machine Preparation; Unpacking The Machine; Battery Installation - Pacific Proteus 26 Operating & Maintenance Instructions

1) UNPACKING THE MACHINE

a) Take off the outer packaging.
b) The machine is fastened to
the pallet with wooden
wedges that block the wheels.
Remove wedge and tie down
straps.
c) Using a ramp, pull the
machine off the pallet.

2) BATTERY INSTALLATION

a) Lift the recovery tank forward.
b) Detach the squeegee hose
(Item 1- Upper Image) from
the recovery tank.
c) Remove the vacuum cover
(Item 2 - Upper Image) by
rotating it counterclockwise.
d) Place the batteries in the
battery compartment.
e) Connect the battery connector
(Item 2 – Lower Image) to the
machine connector (Item 1 –
Lower Image).
f) Lower the recovery tank and
reassemble the vacuum plug
and squeegee hose.

MACHINE PREPARATION

Page 4 of 17