CLEANING THE SQUEEGEE HOSE
To obtain the best drying results, keep the
squeegee hose clean. To clean the squeegee
hose it is necessary to:
1) Take off the vacuum hose from its vacuum
port on the squeegee.
2) Remove the other end of the vacuum hose
from the recovery tank.
3) Wash the inner part of the hose with clean
water.
4) Reassemble.
WARNING: Do not wash the hose that
goes from the vacuum motor to the
vacuum cover.
SOLUTION TANK CLEANING
5) Remove the fill cap from the solution tank.
6) Rinse with clear water.
7) Remove the solution tank drain hose and cap
and empty the solution tank.
WARNING: Use gloves for protection
from contact with dangerous solution.
CHECK BRAKE
Check the gap distance between the brake pads
and wheels weekly. Adjust the gap so that there
is 1/8 inch (3mm) between the brake pads and
wheels by adjusting the nuts shown in the
picture.
WEEKLY MACHINE MAINTENANCE
Page 15 of 17