Cleaning The Recovery Tank; Cleaning The Vacuum Filter - Pacific Proteus 26 Operating & Maintenance Instructions

CLEANING THE RECOVERY TANK

1) Empty the recovery tank by removing the plug
from the drain hose.
WARNING: Use gloves for protection
from contact with dangerous solution.
2) Lift the cover of the recovery tank.
3) Take off the vacuum cover by rotating it
counter clockwise.
4) Remove the filter and its housing.
5) Rinse the tank with clean water.

CLEANING THE VACUUM FILTER

6) Lift the cover.
7) Take off the vacuum cover by rotating it
counter clockwise.
8) Remove the filter and its housing.
9) Use clear water to clean the walls and the
bottom of the filter.
10) Remove the filter and its housing.
11) Wash all components thoroughly.
12) Reassemble repeating the above operations
in reverse.
DAILY MACHINE MAINTENANCE
Page 12 of 17