Pacific FURY 20BB Operating & Maintenance Instructions

20” battery burnisher

Advertisement

Quick Links

INTRODUCTION
This operator's book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell all
operators to read the book. If you do not follow the instruc-
tions, you can cause an injury or damage equipment, furni-
ture or buildings.
For new books write to:
Pacific Steamex, Inc.
2259 S. Sheridan
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a "CONCEALED DAMAGE REPORT" immediately with
the delivering carrier.
FURY 20BB
20" Battery
Burnisher
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest product
information available at the time of publication. Pacific
Steamex reserves the right to make changes or improvements
to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL
SERIAL NUMBER
PART NUMBER
DATE PURCHASED

Advertisement

Table of Contents
loading

Summary of Contents for Pacific FURY 20BB

  • Page 1 The contents of this manual are based on the latest product This operator’s book has important information for the use information available at the time of publication. Pacific and safe operation of this machine. Read this book care- Steamex reserves the right to make changes or improvements fully before starting the machine.
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS MACHINE! WARNING! To reduce the risk of fire, electric shock, or injury: 1. You must have training in the operation of the machine before using it. READ THE INSTRUCTION BOOK AND CHARGER MANUAL.
  • Page 3: Battery Installation

    OPERATING INSTRUCTIONS WARNING! For the safe operation of this machine follow PAD INSTALLATION the instructions given in this booklet and the training given For Burnishing: Select the correct clean burnishing pad by your supervisor. Failure to do so can result in personal (your supplier can help you).
  • Page 4: Maintenance And Troubleshooting

    MAINTENANCE & TROUBLE SHOOTING PREVENTATIVE MAINTENANCE TROUBLE SHOOTING WARNING! Always move the On/Off Switch to the OFF Green light will not come on: position (pushed all the way down) before performing any 1. Check batteries service, maintenance, pad changing or inspection of the 2.
  • Page 5 FURY 20BB FINAL ASSEMBLY 522307 Chassis Cover (1) 521901 Chassis Base (1) 523603 Skirt (1) Not Shown (Items to Attach Skirt): 528001 Strap-Skirt (1) 962186 Screw-10-32x1-1/8 (1) W107D Washer-3/16 Flat SAE (2) 920001 Nut-10-32 Nyloc Stop (1) 524501 Shroud (1)
  • Page 6 FURY 20BB BATTERY ASSEMBLY 861307 Battery-215AH 12V (3) 911607 Cable Set-Battery Connector (1) Not Shown: 862411 Charger-36V/25 Amp (1)
  • Page 7 FURY 20BB SIDE COOLING GUARD ASSEMBLY 523602 Guard-Cooling Fan (2) (one on each side of unit) 962360 Screw-10-32x1/2 LG (8) (four on each side of unit) FURY 20BB SIDE CONTROL PANEL ASSEMBLY 525121 Label-R Control Panel (1) 525122 Label-L Control Panel (1) 528401 Round Stud-7/16”...
  • Page 8 FURY 20BB MOTOR & DUST CONTROL ASSEMBLY 525209 Motor-2.5HP (1) - Units built after 9/2010 525210 Motor Service Kit - Units older than 9/2010 520601 Filter Bag-Cloth (1) 523309 Filter-Foam (1) 253306 Fitting-Pipe (1) 524501 Shroud (1) 523603 Skirt (1)
  • Page 9 FURY 20BB PAD DRIVER ASSEMBLY Hardware To Mount Flange To Motor: 962022 Screw-3/8-16x1 HH (4) 980009 Washer-3/8 Lock (4) 523307 Flange-9” (1) Hardware To Mount Flange To Shroud: 962048 Screw-3/8-16x1-1/4 HH (3) 980007 Washer-5/16 Flat (3) 980009 Washer-3/8 Lock (3) Reverse View of Pad Driver Assm.
  • Page 10 FURY 20BB SWITCH ASSEMBLY 962010 Screw-1/4-20x1 (3) 980004 Washer-1/4 Flat (4) 520813 Bracket-Switch (1) 920004 Nut-1/4-20 Hex (1) 525011 Switch Spring Kit (1) 256721 Drive Pin (2) 911561 Switch-Pad Activation (1) Not Shown: 911573 Spacer-Switch (2) W132D Screw-6-32x3/4 PHP SS (2)
  • Page 11 FURY 20BB PANEL ASSEMBLY (CLOSE UP) 911297 Solenoid-DC Contactor (1) 528542 Shunt-Mounted (1) W102D Screw-1/4-20x5/8 PHP (2) 962003 Screw-10-32x3/4 PHP (2) W104D Washer-1/4 Flat (2) 920001 Nut-10-32 Nyloc (2) 920011 Nut-1/4-20 Elastic Stop (2) 523702 Handle Grip (1) 525113 Lift Handle (1)
  • Page 12 FURY 20BB PANEL & LEVER ASSEMBLY PARTS LIST 962222 Screw-10-32x1/2 (6) 962454 Screw-1/4-20x1/2 (4) 526605 Latch Plate (1) 527008 Cover Panel (1) 528104 Shrink Wrap- Per Inch (7) 528102 Sleeve-Pressure (1) 962207 Screw-1/2-13x3/4 (1) 528304 Spring (3) 521190 Bushing (1)
  • Page 13 FURY 20BB FRAME ASSEMBLY 529790 Wheel-8” (2) Not Shown: 962349 Screw-3/8-16x5/8 Hex (2) 980103 Washer-3/8 (2) 520808 Axle Mount Bracket (2) 520507 Axle (1) W120D Washer-1/2 Flat (12) 962207 Screw-1/2-13x3/4 Hex (4) 525109 Lift Weldment (1) 521190 Bushing (2) 962207 Screw-1/2-13x3/4 Hex (2)
  • Page 14 FURY 20BB REAR CASTER & COOLING VENT ASSEMBLY Below image is the rear, underside of the chassis with the unit flipped forward 962360 Screw-Hex Hd, Self Tapping (4) 962207 Screw-1/2-13x3/4 Hex (2) 521190 Bushing (2) 529704 Caster-4” (1) 523602 Guard-Cooling Fan (1)
  • Page 15 FURY 20BB WIRING DIAGRAM...
  • Page 16: Warranty Policy

    1. The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid. If unable to locate the Dealer, you may contact Pacific at the address listed herein for the location of the nearest Pacific repair center or agent or for other instructions pertaining to your warranty difficulty.

Table of Contents