Pacific TRIUMPH 1190 Parts Manual,Operating & Maintenance Instructions
  1. Manuals
  2. Brands
  3. Pacific Manuals
  4. Floor Machine
  5. TRIUMPH 1190
  6. Parts manual,operating & maintenance instructions

Pacific TRIUMPH 1190 Parts Manual,Operating & Maintenance Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CARPET EXTRACTOR
INTRODUCTION
This operator's book has important information for the
use and safe operation of this machine. Read this book
carefully before starting the machine. Keep this book
and tell all operators to read the book. If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.
For new books write to:
Pacific
2259 South Sheridan Road
Muskegon, MI 49442
Carefully inspect all components to ensure that there is
no concealed freight damage. If such damage is dis-
covered, file a "CONCEALED DAMAGE REPORT" im-
mediately with the delivering carrier.
TRIUMPH 1190
Parts Manual
READ THIS BOOK
OPERATING & MAINTENANCE
INSTRUCTIONS
The contents of this manual are based on the latest
product information available at the time of publica-
tion. Pacific reserves the right to make changes or
improvements to its machines without notice.
FOR YOUR CONVENIENCE, RECORD THE
FOLLOWING IMPORTANT INFORMATION:
MODEL_______________________________
SERIAL NUMBER______________________
PART NUMBER _________________________
DATE PURCHASED ____________________

Advertisement

Table of Contents
loading

Related Manuals for Pacific TRIUMPH 1190

Summary of Contents for Pacific TRIUMPH 1190

  • Page 1 Keep this book tion. Pacific reserves the right to make changes or and tell all operators to read the book. If you do not improvements to its machines without notice.

  • Page 2: Extension Cords

    INTRODUCTION The SELF CONTAINED EXTRACTOR is a fully self-contained, portable carpet extractor system and is intended for commercial use. A wand with external vacuum and solution hoses are not necessary with your machine, but available. The SELF CONTAINED EXTRACTOR has a 100 psi solution pump and a four (4) jet spraying system located on the bottom side of the machine to apply solution to the carpet.

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE WARNING : To reduce the risk of fire, electric shock, or injury: 1. You must have training in the operation of this machine before using it. 2.

  • Page 4: Prestart-Up Checks

    PREPARATION AND TRANSPORTATION PRESTART-UP CHECKS The SELF CONTAINED EXTRACTOR is very simple and easy to operate. Very little maintenance and service are required to keep your machine in top operating condition. The following procedures are recommended to maintain the high level of performance expected from your machine. They are also intended to identify potential safety hazards and problems which could reduce the service life of the machine.

  • Page 5: Operating Procedures

    OPERATING PROCEDURES The SELF CONTAINED EXTRACTOR is the most “user friendly” self-contained extractors available. The following procedures are intended to describe and detail proper operation of your machine. Failure to follow these recom- mended procedures can reduce the machine’s performance and may result in damage to the machine. 1.
  • Page 6 SERVICING The SELF CONTAINED EXTRACTOR is designed and manufactured to provide years of trouble free service with a minimum of maintenance and service. The following recommendations are intended to assist the operator and Service Technician in performing routine maintenance. Failure to follow these recommendations can result in damage to your machine and diminished performance. Warning: Always unplug your machine before performing any service.
  • Page 7 3. Vacuum Blower Replacement: a) Remove the dome top and carefully turn the machine upside down. b) Remove the two hex bolts at the base of the black panel on the back of machine. c) Remove the wheels in order to get at the hex bolts in step (d). Shoulder bolts hold the wheels on. d) Then remove the six hex head bolts on both sides of blower chassis.
  • Page 8 TANK & BLOWER ASSEMBLY...
  • Page 9 TANK & BLOWER ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. 208662 Recovery Tank 980026 Washer #8 Int. Tooth W191D1 Screw #10-24 x 3/4 RHP SS W143D Nut: Hex #8-32 SS 217201 Dome Clasp W317D Screw #4-40 x 1-1/4"...
  • Page 10 PUMP & CHASSIS...
  • Page 11 PUMP & CHASSIS PARTS LIST ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY. S626P Strainer 211501 Jet Cap W166D Brass: Jam Nut W205D Screw #8-32 x 1" Nylon M/S S372P Washer: Nylon A13445 Rectifier 211310 90° Jet Body 3/8 920617 Nut #8-32 Hex Nylon 203308...

  • Page 12: Warranty Policy

    The inoperative machine or warranted parts must be delivered to the authorized service center with shipping and delivery charges prepaid. If unable to locate a service center, you may contact Pacific at the address listed herein for the location of the nearest repair center or agent or for other instructions pertaining to your warranty difficulty.

Table of Contents