Pacific Proteus 26 Operating & Maintenance Instructions page 11

After finishing your work and before any type of
maintenance is done, it is necessary to do the
following:
1) Close the water valve with lever (1).
2) Raise the brush base with lever (2).
3) Lift the squeegee with lever (3). Note: The
squeegee blades can be damaged if the
squeegee is not raised during storage or
transport.
4) Switch off the water solenoid valve switch (3)
5) Switch off the brush motor switch (5).
6) Switch off the vacuum motor switch (4).
7) Transport the machine to the location where
the recovery tank should be emptied.
8) Turn off key (1).
9) Set the parking brake (4) in the above image.
10) Remove the hose at the front of the recovery
tank.
11) Unscrew and remove the drain plug and
empty the recovery tank.
WARNING! Use gloves for protection
from contact with dangerous solutions.
12) Remove the brushes or pad drivers and clean
them with clear water.
UPON COMPLETION OF MACHINE USE
Page 11 of 17