Led Description - GeoVision GV-BX120D User Manual

No. Name
3 Audio Out
4 Audio In
I/O Terminal
5
Block
6 Power LED
Auto Iris
7
Connector
8 DC 12V Port
9 LAN / PoE
10 Default
11 Light Sensor
12 Focus Screw
13 Iris Screw
14 Microphone
15 Zoom Screw
16 Status LED
LED
Power LED turns green
Status LED turns green
Description
Connects a speaker for audio output.
Connects a microphone for audio input.
For details, see 2.6 I/O Terminal Block.
Indicates the power is supplied. For detail, see
the table below.
Plug the iris control cable to the connector.
Connects to power.
Connects to a 10/100 Ethernet or PoE.
Resets all configurations of the GV-IPCAM
H.264 to the default factory settings. See 23.3
Restoring to Factory Default Settings.
Detects light to switch between day and night
mode.
Adjusts the focus of the camera.
Adjusts the iris of the camera.
Records the sounds.
Adjusts the zoom of the camera.
Turns on when the unit is ready for use. For
detail, see the table below.
Description
The system powers on and succeeds to boot
up.
The system is ready for use.
2 Box Camera
11