3.5 Connecting the Camera
1.
Connect power using one of the following methods:
•
Plug the power adapter to the 5V terminal block. The power
adapter is an optional device. For detail, see Options in the
manual.
•
Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
The power and status LEDs shall turn on (green).
2.
Use a standard network cable to connect the camera to your network.
3.
Optionally connect a speaker.
4.
Insert a micro SD card (SD/SDHC, version 2.0 only, Class 10).
5.
You are ready to access the live view, adjust the image clarity and
configure the basics. See Getting Started, Chapter 19.
28
3
Figure 3-5
1
2