Job Specification Sheet - Hellenbrand Water Conditioning System H-125 Series Owner's Manual

H-125 series

Hide thumbs Also See for Water Conditioning System H-125 Series:

Specification sheet (2 pages)

Owner's manual (36 pages)

Table Of Contents

Table of Contents

MODEL NO. __________________________________________________________________________________________

*WATER TEST AT TIME OF INSTALLATION

_______ Hardness CaCo

_______ Iron (ppm)

_______ pH

______ Reclamation mode enabled

______ No Hard By-pass enabled

______ Alternator system enabled

OPTIONAL RELAY SETTINGS

_______ Off

Relay 1

_______ On Time

Relay 1 Set Point

_______Start Time, Minutes into Regeneration

Relay 1 Duration

_______Run Time

_______ On Gallons

Relay 1 Set Point

Pulse per _______ Gallons

Relay 1 Duration

_______ Minutes Relay Closed

Relay 1 Set Point

_______ On Regen Gallons

Relay 1 Set Point

Pulse per _______ Gallons

Relay 1 Duration

_______ Minutes Relay Closed

Relay 1 Set Point

*SIZING INFORMATION

All Water is Softened Except:

_______ Rear Hose Bib

_______ Other ________________________________________________________________________________________

The average family uses 75 gallons per person daily for all water uses in the home, about 50 gallons per person daily if soft water

is not supplied to the toilets, and about 30 gallons per person daily if only hot water is softened.

_______ Daily Water Usage (Gallons/Person)

x _______ Family Size (Number of people in family)

= _______ Total Gallons Per Day

x _______ Grains Per Gallon of Hardness

(Note: Add 3 grains per gallon of hardness for each ppm iron for total compensated hardness)

= _______ Total Grains Per Day

*INSTALLATION DATE _________________________________________________________________________________

*SERIAL NUMBER ____________________________________________________________________________________

NOTES ______________________________________________________________________________________________