Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hellenbrand Iron Curtain System
Summary of Contents for Hellenbrand Iron Curtain System
- Page 1 Manufactured by:...
- Page 2 Congratulations Questions? TABLE OF CONTENTS...
- Page 3 INSTALLATION DATA Air Recharge & Air Bleed-Off Aeration Head Fitting Connection Valve Fitting Connection Assembly...
- Page 4 Iron Filtration System Principle of Operation If tannins are present, field tests have shown that they will not be removed and will also hinder the ability of this system to effectively remove iron, manganese, and/or hydrogen sulfide. Installation of this system on water supplies with more than 0.5 ppm of tannins will void warranty.
-
Page 5: Operating Conditions
Operating Conditions ence of organics such as tannins above 0.5 ppm voids any claims for this system to perform as stated above. In some applications, tannin levels below 0.5 ppm or the presence of other organics may hinder the operation of this system. TDS more than 750 ppm voids any claims for this system to perform as stated above.* General Application... - Page 6 Pre-Installation Check List Installation Instructions Start-Up...
-
Page 7: Specifications
Regeneration Frequency Specifications Filter & Max. Aeration Service Inlet/ Tank Media Flow Outlet Size Cu. Ft Model IC-10 10"x54" 3/4" IC-10A 10"x54" 3/4" IC-10+ 10"x54" 3/4" IC-12 12"x52" 1" IC-12A 12"x52" 1" IC-12+ 12"x52" 1" TYPE A IRON CURTAIN SYSTEMS (Optional) Instructions for Adding IC pH Correction Media (2) Back-... - Page 9 How To Set Timer How to set days on which water conditioner is to regenerate. How to set the time of day.
- Page 10 How to set Regeneration Time How To Manually Regenerate Your Water Filter At Any Time How To Manually Advance Control Center to a Specific Cycle backwash air recharge rapid rinse cycle advance cycle shut off...
- Page 11 How To Set Regeneration Cycle Program How to set the regeneration cycle program. How to change the length of the backwash time. How to change the length of air recharge cycle (ARC). How to change the length of rapid rinse time.
- Page 13 Iron Curtain Timer Assembly...
- Page 16 Iron Curtain Aeration Pump Repair Instructions...
- Page 17 IC-10 Series Control Valve Assembly...
- Page 18 IC-12 Series Control Valve Assembly...
- Page 19 Instructions for Replacing Piston Assembly and Seal Kit...
- Page 22 IRON CURTAIN FLOW DIAGRAMS...
- Page 25 Troubleshooting...
- Page 27 Winterizing Iron Curtain Systems (Optional) Prior to draining water distributor system and Iron Curtain System, manually initiate regeneration of Iron Curtain System (see page 10) and allow system to com- plete regeneration and return to service position auto- matically.
- Page 28 FOR THIS PROVISION MIGHT ARISE BY IMPLICATION OR OPERATION OF LAW; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. UNDER NO CIRCUMSTANCES SHALL HELLENBRAND, INC., BE LIABLE TO PURCHASER OR TO ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES OR FOR ANY OTHER LOSS,...