Spacer Stack Assembly - Hellenbrand Water Conditioning System H-125 Series Owner's Manual

Drive Cap asseMblY, DOWn flOW pisTOn, reGeneranT pisTOn anD
DRAWING NO. ORDER NO.
1 151-V3430
2 15-V3004
3 15-V3343
4 151-V3407
5 15-V3174
6 15-V3135
7 15-V3180
8 151-V3358
Note: The regenerant piston is not used in backwash only application.
inJeCTOr Cap, inJeCTOr sCreen, inJeCTOr, pluG anD O-rinG
DRAWING NO. ORDER NO.
1 15-V3176
2 15-V3152
3 15-V3177
4 15-V3010-1z
15-V3010-1A
15-V3010-1B
15-V3010-1C
15-V3010-1D
15-V3010-1E
5 15-V3010-1F
15-V3010-1G
15-V3010-1H
15-V3010-1I
15-V3010-1J
15-V3010-1K
Not Shown 15-V3170
Not Shown 15-V3171
*The injector plug and the injector each contain one 011 (lower) and 013 (upper) o-ring.
Note: For upflow position, injector is located in the up hole and injector plug is in the
other hole. H125 upflow bodies are identified by having the DN marking removed. For
a filter that ony backwashes, injector plugs are located in both holes.
24

spaCer sTaCk asseMblY

DESCRIPTION
H125 Spacer Stack Assembly
Drive Cap Assembly
H125 Drive Back Plate
H125 Piston Downflow Assy
Regenerant Piston
O-ring 228
O-ring 337
O-ring 219 (Dist. Tube Opening 1.32")
4b
2
DESCRIPTION QUANTITY
Injector Cap
O-ring 135
Injector Screen
Injector Assembly z Plug
Injector Assembly A Black
Injector Assembly B Brown
Injector Assembly C Violet
Injector Assembly D Red
Injector Assembly E White
Injector Assembly F Blue
Injector Assembly G Yellow
Injector Assembly H Green
Injector Assembly I Orange
Injector Assembly J Light Blue
Injector Assembly K Light Green
O-ring 011
O-ring 013
QUANTITY
1
1
1
1
1
1
1
1
1
5
4
4a
6
1
1
1
1
1
3
8




7
