Setup
Lamp
Replacement
Procedure
-10-
The Rogue™ RH1 Hybrid is equipped with an Osram Sirius 330W X8 lamp. Follow the
procedure below to safely change the lamp.
Disconnect the product from power before opening.
1. Turn the product off and disconnect it from power. Wait at least 15 minutes for the lamp to
cool down.
2. Remove back cover using the 2 Phillips-head ¼-turn screws on the rear panel of the head.
3. Orient the product so that the lamp power wires are coming from the lower right corner as
you are looking at the rear head.
Spring Clip
Rogue™ RH1 Hybrid User Manual Rev. 1