Setup; Ac Power; Ac Plug; Power Linking - Chauvet Q-Wash™ 419Z-LED User Manual

Hide thumbs Also See for Q-Wash™ 419Z-LED:
Table of Contents

Advertisement

3. Setup

The Q-Wash™ 419Z-LED has an auto-ranging power supply that works with an input

AC Power

voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements for
each Q-Wash™ 419Z-LED, refer to the label affixed to the product. You can also
refer to the
The listed current rating indicates the maximum current draw during normal
operation. For more information, you may download Sizing Circuit Breakers from the
CHAUVET® website: www.chauvetpro.com.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
The Q-Wash™ 419Z-LED comes with a power input cord terminated with a Neutrik®

AC Plug

powerCON® A connector and an Edison power cord adapter. If the power cord
adapter that came with your product has no plug or you need to change the Edison
plug, use the table below to wire the new plug.
Connection Wire (U.S.)
AC Live
AC Neutral White
AC Ground Green/Yellow Green/Yellow Green
The Q-Wash™ 419Z-LED supports power linking. You can power link up to:
Power
Linking
This product comes with a power input cord. This product does not come with a
power linking cable; however, a power linking cable is available as an option.
Make sure to disconnect the product's power cord before replacing a blown fuse.
Always replace the blown fuse with another of the same type and rating.
Fuse
The stand-alone
battery charger has no
Replacement
external fuse.
However, the flight
case/charger comes
with a replaceable
fuse (T 6.3 A @ 250
V).
To change the fuse on
the flight
case/charger, do the
following:
the product from the
power outlet.
Phillips #2 head
screwdriver, unscrew
Technical Specifications
Wire (Europe) Screw Color
Black
Brown
Blue
5 products at 120 VAC,
9 products at 208 VAC, or
9 products at 230 VAC
1. Disconnect
2. With a
section in this manual.
Yellow or Brass
Silver

Advertisement

Table of Contents
loading

Table of Contents