If you should require sending any items back to CHAUVET, call CHAUVET for a (RMA) Return Note: Merchandise Authorization number. The factory will not allow any shipments without an RMA.
If you have any questions about how to operate the fixture safely, please contact CHAUVET. P r o t e c t i o n a g a i n s t E l e c t r i c S h o c k •...
Product Overview Yoke Fuse Connectors DMX OU T DMX IN Voltage Select Switch Q-Wash 36 User Manual Power Switch POWE R MI C FUS E POWE R IN PU T 110V~230 V MOD E IEC Power Connector Head Base Microphone...
You must supply your own clamp and make sure the clamp is capable of supporting the weight of this fixture. You can order C-clamps from any CHAUVET dealer or distributor. Block access below the work area and use suitable and stable platform when installing or servicing fixture.
Maximum recommended number of fixtures on a serial data link: 32 fixtures Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET-certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
(male) 3 pin connector. 3. Then, proceed to connect from the output as stated above to the input of the following fixture and so on. CHAUVET Certified DMX Data Cables Order Code DMX1.5 DMX4.5 DMX10...
4. O PERATING NSTRUCTIONS Navigating the Control Panel Access control panel functions using the four panel buttons located directly underneath the LCD Display. Button Used to access the menu or to return to a previous menu option <MODE> Scrolls through menu options in ascending order <UP>...
Slave Mode Operation This mode allows the unit to operate as the slave of another Master unit. Up to 32 fixtures may be Menu linked together in this mode. In the menu, select “Run”. Next, scroll through until “Slave” is displayed, and select it. Press <MODE>...
Additional Menu Options This fixture can be customized in several different ways at the discretion of the user. This section details how to change the fan speed, invert the Pan, invert the Tilt, reset the fixture, and restore the fixture to factory default settings. To change the fan speed In the menu, select “Options”.
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin DMX-compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’). Contact the nearest Chauvet dealer to order any of these cables.
Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products returned without an RA # will be refused. Call CHAUVET and request an RA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.
Menu Map Menu Menu Menu Edit Prg Options Address Edit Reset Address Program Custom 001-499 Step Confirm 001-100 Reset 000-255 Speed Tilt 000-255 Speed Speed High 000-255 Green 000-255 Blue 000-255 When navigating the menu: Strobe 000-255 Use the “UP” button to move right. Use the “DOWN”...
Need help?
Do you have a question about the Q-Wash 36 and is the answer not in the manual?
Questions and answers