Figure 7-8: Auxiliary Files Screen - AudioCodes Mediant 2000 Installation Manual

Fast Track Installation Guide
To save the loaded auxiliary files to flash memory, take these 2 steps:
Click the Save Configuration button on the main menu bar; the 'Save Configuration to the
1.
Flash Memory' screen is displayed.
Note:
Click the Save Configuration button in the middle of the screen; a confirmation message
2.
appears when the save is complete.
Note:
To reset the Mediant 2000, take these 2 steps:
Click the Reset button on the main menu bar; the 'Reset' screen is displayed.
1.
Click the Reset button in the middle of the screen; the auxiliary files are saved into flash and
2.
the Mediant 2000 restarts. This takes approximately 3 minutes to complete. When the
Mediant 2000 has finished restarting, the Ready and LAN LEDs on the front panel are lit
green.
Version 4.6

Figure 7-8: Auxiliary Files Screen

Saving an auxiliary file to flash memory may disrupt traffic on the Mediant
2000. To avoid this, disable all traffic on the device before saving to flash
memory.
A device reset is required to activate a loaded CPT file, and may be required
for the activation of certain ini file parameters.
39
7. Upgrading the Mediant 2000
July 2005