Security
Table 11: Security Settings Command Levels
● Auto Screenlock
● Auto Screenlock – OFF
● Set Passcode
● Lock After...
● Allow fan/mode changes – NO
● Allow setpoint changes – NO
● Allow override – NO
● Setpoint Limits
● Setpoint Limits – OFF
● Minimum Cool Setpoint
● Maximum Heat Setpoint
Using the Security Functions
SecuritySecurity settings may be set to limit or prevent
changes to your thermostat.
● Auto Screenlock
● Auto Screenlock – OFF
● Auto Screenlock – ON
● Set Passcode*
NOTE: Code must be set before Auto Screenlock can be
turned on.
* If you forget your passcode, enter 6736 for access.
Use keypad to enter and confirm passcode.
Figure 41: Keypad Display
IM 1227 • MODELS DC THERMOSTATS
When the thermostat is locked, the bottom bar of the display
will show:
Press UNLOCK then enter passcode to access thermostat
settings.
►
Figure 42: Unlock Button Location
►
►
►
►
►
►
►
►
Set the time the screen will automatically lock after the last
►
button press.
►
Choose to allow mode changes when Auto Screenlock is
ON.
Choose to allow setpoint changes when Auto Screenlock is
►
ON.
►
Choose to allow use of the Override button when Auto
Screenlock is ON.
►
(code not set )
● Setpoint Limits
Limits how high or low heating and cooling may be adjusted.
40
h
r
T
igh
esoluTion
ouCh
● Lock After...
● Allow fan/mode changes – NO
● Allow setpoint changes – NO
● Allow override – NO
s
D
T
Creen
igiTal
hermosTaT
►
(5 m)
►
►
►
►
www.DaikinApplied.com