Setting Up The Machine Again For Use Over Network; Changing The Port Name (Windows) - Canon PIXMA MX850 series Quick Start Manual

Setting Up the Machine Again for Use over Network
Restore the machine settings to the default and set up the machine to be used over network.
For details on restoring the machine settings to the default, refer to "Initializing Network Settings" in
"Displaying and Initializing Network Settings" of the User's Guide on-screen manual.
For details on setting up the machine again, see "2 Installing the Software" on page 3 for Windows or
"2 Installing the Software" on page 18 for Macintosh. Click Custom Install in step 6, then select MP
Drivers and Canon IJ Network Tool to install. If you have downloaded the latest MP Drivers from
our website and installed them on your computer, select Canon IJ Network Tool only to install.
Changing the Port Name (Windows)
To change the port name, click View Setup Results on the Setup Completion dialog box, then click
Set Port Name.
The Set Port Name dialog box is displayed, where you specify the port name. By changing the port
name, you can change the name of the machine. When you set up an additional computer to use the
machine whose port name you changed, the machine is displayed with the changed port name.
When multiple computers or printers are present, it is useful to change the r:lame to one that is easy
to remember:
Port Name
Port names should consist of alphanumeric characters and be no longer than 21 characters,
excluding the prefix. The port name includes the fixed prefix "CNBJNP_", which you do not need to
enter.
Troubleshooting 37