Canon PIXMA MX850 series Quick Start Manual page 11

(3) FAX button
Switches the machine to fax mode.
(4) SCAN button
Switches the machine to scan mode. In scan mode, the machine scans a document to
your computer according to the settings selected. To use this button, the machine must
be connected to a computer. For details, refer to the Scanning Guide on-screen manual.
(5) MEMORY CARD button
Switches the machine to memory card mode.
(6) In Use/Memory lamp
Flashes when sending or receiving faxes, and lights when there are documents stored in
the machine's memory.
(7) Alarm lamp
Lights or flashes orange when an error, such as paper-out or ink-out, occurs.
(8) LCD (Liquid Crystal Display)
Displays messages, menu selections, and the operational status.
(9) Menu button
Displays the menu screen.
(10) Settings button
Configures the page size, media type, and image correction settings.
(11) Numeric buttons
Enter numerical values such as the number of copies, as well as fax/telephone numbers
and characters.
(12) Redial/Pause button
Redials the last number called using the Numeric buttons. Also enters pauses between
or after numbers when dialing or registering numbers.
(13) Coded Dial button
Press this button and a two-digit code to display a pre-registered fax/telephone number
or group.
(14) Stop/Reset button
Cancels operations such as copying, scanning, or faxing, or a print job in progress.
(15) Black button (top) / Color button (bottom)
Press the Black button to start black & white copying, scanning, or faxing.
Press the Color button to start color copying, photo printing, scanning, or faxing.
(16) Hook button
Connects or disconnects the telephone line.
(17) Tone button
Switches temporarily to tone dialing. Also changes the input mode when entering
characters.
(18) Trimming button
Specifies the cropping area of the displayed photo.
(19)" . . . . . buttons
Scrolls through menu selections and increases/decreases setting values, such as the
number of copies. You can use these buttons when
A, . , ... ,
and • are displayed on
the LCD. Also, the'" button cancels the entered character, and the. button enters a
space between characters when entering characters.
Before Using the Machine 7