Canon PIXMA MX850 series Quick Start Manual page 232

• Please confirm the included items against the illustration printed on the lid of the packing box.
• A USB cable is necessary to connect the machine with your computer.
1
Prepare the Machine
2
Install the Print Head
~
Important
If the Scanning Unit (Printer Cover) is left open
for more than 10 minutes, the Print Head Holder
moves to the right. Close and reopen the Scanning
Unit (Printer Cover) to return the Holder to the
center.
~
Important
• Make sure that the machine is turned on and the
COPY button lights green.
• Make sure that the Print Head Holder has moved
to the center.
~
Important
Do not touch the print head nozzles or the electri-
cal contacts.
Do not touch!
() Push the Print Head to hold it in place,
and lower the Print Head Lock Lever.
o
Insert the Print Head.
o
Firmly raise the Print Head Lock Lever
until it stops. The Print Head Lock
Lever may feel heavy.
A
Caution
There may be some transparent or light blue ink
on the inside of the bag the print head comes in,
or the inside of the protective cap - this has no
effect on print quality. Be careful not to get ink on
yourself when handling these items.
o
Remove the orange protective cap from
the Print Head and discard it.
o
Remove the Print Head from its
package.
Once the message "Install the print head and
set the ink tank." appears, go to
O.
~
Important
If an unintended language is displayed on the
LCD, press the Back button on the Operation
Panel to return to the Language selection screen.
o
Open the Inner Cover. Write down
the serial number located inside the
machine. You will need this to register
your product.
o
Lift the Scanning Unit (Printer Cover)
until it locks into place. The Paper Output
Tray will open automatically and the Print
Head Holder moves to the center. Then
open the Output Tray Extension.
If the Paper Output Tray does not open
automatically, press the Open button to open it.
~
Important
• Make sure that the Document Cover is closed.
• Do NOT connect the USB cable at this stage.
() Press the ON/OFF button to turn on the
machine.
The machine will initialize. Wait until the COPY
button stops flashing and remains lit green.
o
Plug the power cord in the back of the
machine and connect the other end to
the wall outlet.
Telephone
line
~
Important
Be sure to use the bundled telephone line cable.
~
Important
If the Document Cover is opened, you cannot open
the Scanning Unit (Printer Cover). Be sure to open
the Scanning Unit (Printer Cover) with the Docu-
ment Cover closed.
Telephone
line .....
_-+----IL
Machine
• Built-in computer modem and telephone
(Telephone
I
~Note
The tape or the protective material position is subject
to change.
o
Connect the telephone line and any
necessary external device.
You can connect an external device (telephone
or answering machine) if necessary.
Remove the Telephone connector cap to
connect the external device.
o
Remove the protective material in the
ADF (Auto Document Feeder).
o
Lift the Scanning Unit (Printer Cover)
until it locks into place, open the Paper
Output Tray, then take out the Print
Head, ink tanks and power cord from
inside the machine.
A
Caution
• Before turning on the machine, remove all of the
shipping tapes and protective material.
• For your safety, always firmly grip the areas il-
lustrated when lifting the Scanning Unit (Printer
Cover).