Canon PIXMA MX850 series Quick Start Manual page 200

10
The Installation completed successfully
screen appears.
If only one CD-ROM is included in the package
for the Windows setup
Click Exit.
The Setup CD-ROM will be ejected.
If it is not ejected automatically, remove it manually.
If Restart is displayed, make sure that the Restart
the system now (recommended) check box is
selected, then click Restart. After the computer
restarts, remove the Setup CD-ROM.
W
Note
Keep the CD-ROM in a safe place in case you need to
reinstall the software.
If two CD-ROMs are included in the package for
the Windows setup
When the Continue to Windows CD-2 screen
appears, perform the following steps (1) to (3) to
complete the installation.
(1) Click Exit.
The Setup CD-ROM will be ejected.
If it is not ejected automatically, remove it
manually.
If Restart is displayed, make sure that the
Restart the system now (recommended)
check box is selected, then click Restart. After
the computer restarts, remove the Setup CO-
RaM.
(2) Insert the Setup CD-ROM "Windows (CD-2)
Macintosh".
(3) Follow the on-screen instructions to proceed
with the setup.
After installation is complete, the Setup CO-
RaM will be ejected.
If it is not ejected automatically, remove it
manually.
W
Note
Keep the CD-ROMs in a safe place in case you need to
reinstall the software.
When using Windows Vista:
To use the Card Slot over network, mount the Card
Slot using the Canon IJ Network Tool after software
installation is complete. For details, refer to "Using
the Card Slot over a Network" in the User's Guide
on-screen manual.
<:~
..
on
Installation completed
successfully.
10 Setting Up the Machine and the Computer (Windows)