Canon PIXMA MX850 series Quick Start Manual page 140

Message Action
"Document size is too long. Redo The document is too long or is jammed in the ADF. Remove the document page
operation after checking document on jammed in the ADF, then press the OK button. When the error is cleared, make
ADF and pressing OK." sure that the document you are loading meets the machine's requirements
before redoing the operation. See "Original Document Requirements" on
page 16 and "Document Jams in the ADF" on page 152.
"Document size not suitable for two-
Two-sided scanning can be used only for A4 or Letter-sized documents. Press
sided scanning. Press OK to cancel the OK button to discharge the document, and rescan the document one side at
operation and discharge document." a time.
"This paper is not compatible with The Page size or Paper size setting in the printer driver is not compatible with
duplex printing. Remove the paper and automatic duplex printing. Make sure that the paper size suitable for automatic
press OK." duplex printing is specified. The sizes of media suitable for automatic duplex
printing are A4, Letter, A5, B5, and 5" x 7".
Load the paper of suitable size, then press the OK button on the machine.
"Auto redial" The machine is waiting to redial the recipient's number because the line was
busy or the recipient did not answer when you tried to send a document. Wait for
the machine to automatically redial the number. If you want to cancel automatic
redialing, wait until the machine starts dialing the number, then press the Stopl
Reset button. You can also delete the document from memory. See "Document
Stored in Memory" on page 99.
"This group dial cannot be used. You selected a coded speed dial code in which a group is registered with the
Coded dial ##"
Hook button pressed.
In this way, a coded speed dial code in which a group is registered cannot be
used.
* "##" represents a tWO-digit number.
"This group dial cannot be used. You pressed a One-touch Speed Dial button in which a group is registered with
One-touch ##" the Hook button pressed.
In this way, a One-touch Speed Dial button in which a group is registered
cannot be used.
• "##" represents a two-digit number.
"Hang up the phone." The handset is not placed in the handset cradle correctly. Replace the handset
correctly.
''Try again in black & white." The recipient's fax machine is not color-compatible. Press the Black button to
resend the faxes. Alternatively, you can set Color TX to Send in black & white.
Refer to "Color TX" in "Device Settings" of the User's Guide on-screen manual.
"Failed to connect."
The telephone line cable with a modular plug is not plugged in properly, or Dial
tone detect is set to ON. Make sure that the cable is plugged in property, and
resend the fax after a while. If you still cannot send the fax, set Dial tone detect
to OFF. Refer to "Dial tone detect" in "Device Settings" of the User's Guide on-
screen manual.
136 Troubleshooting