Canon PIXMA MX850 series Quick Start Manual page 197

4
When the Check Wired LAN Connection
dialog box appears, remove the LAN
connector cap, connect the machine to the
network devices such as hubs with a LAN
cable, then click Yes.
(A) Wired LAN connector
(B) LAN connector cap
~
Note
The connection may vary depending on your network
environment.
The machine connected with the USB cable is
detected automatically via LAN connection.
In Windows Vista, go to step 6.
In Windows XP and Windows 2000, go to step 5.
~
Note
If the machine was not detected, the Set Printer IP
Address dialog box appears. Make sure of the
following, then click Connect.
• The network devices such as hubs or routers are
turned on, and the machine and the computer are
connected to the network.
• The machine is connected to the computer with the
USB cable.
• The IP address to be set for the machine is
displayed on the Set Printer IP Address dialog
box.
If it is different from the address you want to set for
the machine, select Use next IP address and enter
the desired IP address.
(If the machine is turned off, the Set Printer IP
Address dialog box does not appear.)
If it still fails, see "The Set Printer IP Address dialog
box is displayed" on page 33.
lhepfllll"lhonetwoll\COl.i:lnolbedetected~.
S~lhelPaodli'enoitheprfter lobl!leor."leded
··l12-·---i-oc······;: ...
~
"'2iJj-'-~'-'ZJ.;
;}
li.~ lffl ,; 1
h;J:!~,~"'l!"""iJ
l."<!~,~L,,,~,J
Setting Up the Machine and the Computer (Windows) 7