Canon PIXMA MX850 series Quick Start Manual page 95

• If You Are Using a Single Telephone Line for Faxes and Voice Calls and
Want to Receive Faxes Automatically:
Select FAX priority mode.
(A)
(C)
(A) Incoming call
(8) Voice call: The machine will ring. Pick up the handset to answer the call.
(C) Fax: The machine receives faxes automatically.
W
Note
• The machine does not ring when it receives faxes. It also takes a little time until the machine
rings when the call was a voice call. If you want it to ring immediately, set to TEL priority mode.
• The following settings can be modified to control how your machine handles incoming cans.
Specify the FAX priority mode settings in RX settings under FAX settings. Refer to "FAX
priority mode" in "Device Settings" of the User's Guide on-screen manual.
- The time the machine takes to determine whether a call is a fax or a voice call
- The time the machine rings when the call was a voice call
- Whether or not the machine receives the fax after the specified ring time has elapsed
• The telephone may not ring depending upon the telephone type.
• If You Want to Receive Only Faxes Automatically with Your Machine, or
Have a Dedicated Telephone Line for Fax Use Only:
Select FAX only mode.
(A)
(A) Incoming call
(8) Receives faxes automatically.
(8)
W
Note
• The machine does not ring when it receives faxes.
• If you want to use the machine with a telephone or answering machine, connect it to the
machine and change to FAX priority mode or TEL priority mode.
Faxing 91