Resetting To Factory Defaults - Fuji Xerox DocuPrint M105 b User Manual

Resetting to Factory Defaults

After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
NOTE:
• The following procedure does not initialize the network settings.
– For the DocuPrint M105 f, to initialize the network settings, refer to
1
Press the (System) button.
2
Select Admin Menu, and then press the
3
Select Maintenance, and then press the
4
Select Initialize NVM, and then press the
5
Select System Section to initialize the menu parameters, and then press the
For the DocuPrint M105 f, select User Fax Section to initialize the Address Book data for fax.
6
Select Yes, and then press the
The printer restarts automatically to apply the settings.
button.
button.
button.
button.
Using the Operator Panel Menus and Keypad
"Initialize NVM" on page 283.
button.
318