Scanning From The Operator Panel - Fuji Xerox DocuPrint M105 b User Manual

Scanning From the Operator Panel

The following procedure uses Microsoft
NOTE:
• Ensure that the printer is connected to the computer using the USB cable.
• You must use Express Scan Manager on your computer to configure the output destination of the scanned
image files.
1
For the DocuPrint M105 f/M105 ab, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M105 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M105 f/M105 ab Only)" on page 158
• "Making Copies From the Document Glass" on page 156
2
Press the (Scan) button.
3
Select Scan to Computer(USB), and then press the
4
Configure the scanning settings as necessary.
5
Press the (Start) button.
The scanned image file is generated.
NOTE:
• If the following dialog box appears on your computer, select Express Scan Manager-Btype, and then
click OK. Once you select the Always use this program for this action check box when selecting
Express Scan Manager-Btype, the selected application is automatically used without displaying the
program selection window.
® ®
Windows XP as an example.
button.
Scanning 178