Table of Contents
Advertisement
• TCP/IP
Purpose:
To configure TCP/IP settings. The change becomes effective after the printer is turned off and then on.
Values:
IP Mode
IPv4
NOTE:
•
To configure the IPv6 settings, use CentreWare Internet Services.
Dual Stack*
IPv4
Get IP
Auto IP*
Address
BOOTP
RARP
DHCP
Panel
IP Address
Subnet Mask
Gateway Address
Uses both IPv4 and IPv6 to set the IP address.
Uses IPv4 to set the IP address.
Automatically sets the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Uses DHCP to set the IP address.
Enables the IP address entered on the operator
panel.
Manually sets the IP address allocated to the
printer.
Manually sets the subnet mask.
Manually sets the gateway address.
Using the Operator Panel Menus and Keypad
282
Advertisement
Table of Contents
