Margin Middle - Fuji Xerox DocuPrint M105 b User Manual

Margin Middle

You can specify the middle margin of the copy.
1
For the DocuPrint M105 f/M105 ab, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M105 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M105 f/M105 ab Only)" on page 158
• "Making Copies From the Document Glass" on page 156
2
Press the (Copy) button.
3
Select Margin Middle, and then press the
4
Press the or
the button.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
0 mm*/0.0 inch*
0-50 mm/0.0-2.0 inch
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 159
6
Press the (Start) button to begin copying.
173 Copying
button or enter the desired value using the numeric keypad, and then press
Specify the value in increments of 1 mm/0.1 inch.
button.