Fuji Xerox DocuPrint M105 b User Manual page 284

• Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and
then on.
Values:
LPD
Port 9100
WSD
SNMP
StatusMessenger
CentreWare
Internet Services
LLTD
Bonjour(mDNS)
NOTE:
• WSD stands for Web Services on Devices.
• Initialize NVM
Purpose:
To initialize network data stored in Non-Volatile Memory (NVM). After executing this function and
rebooting the printer, all network settings are reset to their default values.
Values:
Yes
No*
Fax Settings (DocuPrint M105 f Only)
Use the Fax Settings menu to configure the basic fax settings.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
283 Using the Operator Panel Menus and Keypad
Disable Disables the Line Printer Daemon (LPD) port.
Enable* Enables the LPD port.
Disable Disables the Port 9100 port.
Enable* Enables the Port 9100 port.
Disable Disables the WSD port.
Enable* Enables the WSD port.
Disable Disables the Simple Network Management Protocol (SNMP)
UDP port.
Enable* Enables the SNMP UDP port.
Disable Disables the StatusMessenger feature.
Enable* Enables the StatusMessenger feature.
Disable Disables an access to CentreWare Internet Services
embedded in the printer.
Enable* Enables an access to CentreWare Internet Services
embedded in the printer.
Disable Disables the LLTD.
Enable* Enables the LLTD.
Disable Disables the Bonjour (mDNS).
Enable* Enables the Bonjour (mDNS).
Initializes the network data stored in NVM.
Does not initialize the network data stored in NVM.