Advertisement
8907 CoRneR SPInneR®
8907 FRONT
3
4
5
1. Male quick disconnect
2. High-pressure trigger gun
3. Wand grip handle
4. Solution hose
5. 6" Spinner® head
6. Vac Relief
7. Vacuum hose connection port
After the extractor is turned on and vacuum is engaged,
squeeze the High-Pressure Trigger Gun. Liquid flows through
the Solution Hose and activates the Spinner Bar.
1
2
7
6
Jets
VACUUM HOSE AND SOLUTION HOSE ATTACHMENT
After the Vacuum Hose and Solution Hose are attached to the
extractor, connect the Solution Hose to the Male Quick Discon-
nect, and the Vacuum Hose to wand tube.
Hold the machine at waist level and use a back-and-forth motion.
10
USE
Advertisement
