Advertisement
8902 "T" handle, 2" Tube SPInneR®
8902 FRONT
2
4
5
6
1. Quick disconnect
2. High-pressure gun
3. Vacuum hose connection
4. Vac relief
After the extractor is turned on and vacuum is engaged,
squeeze the High-Pressure Trigger Gun. Liquid flows through
the Solution Hose and activates the Spinner Bar.
1
3
5. Hi-pressure solution hose
6. 12" Spinner® head
Jets
VACUUM HOSE AND SOLUTION HOSE ATTACHMENT
After the Vacuum Hose and Solution Hose are attached to the
extractor, connect the Solution Hose to the Male Quick Discon-
nect, and the Vacuum Hose to wand tube.
Hold the machine at waist level and use side to side.
4
USE
Advertisement
