Dynamic Display (Lcd) - Octane Fitness xRide xR6x Operation Manual

Dynamic Display (LCD)

The LCD display prompts you to enter important information, dynamically displays all of the important workout
data and highlights aspects of your workout such as upcoming intervals and resistance changes. Watch the display
as you set up and progress through your workout—it will guide you, motivate you, and reward you with summary
information at the end of your session.
Displays workout time, counting up from 0:00. Time can be increased or decreased during your
workout. The maximum time that users can set is 99:00. When actual workout time is displayed,
the timer goes up to 99:59, then the display rolls over to 0:00. Refer to User Set-up Functions to
learn how to switch from a "count up" to "count down" display
Displays an estimate of the total calories burned during the workout, based on the user's
entered weight. If no specific weight is entered, calories are based on a 150 lb. (68 kg) user..
Displays an estimate of the distance you have traveled. Distance can be shown in either miles
(English) or kilometers (metric). When you first purchase your elliptical the display will be in
English. Refer to User Set-up Functions to learn how to switch from English to metric. Note: On
the elliptical, 400 revolutions is approximately one mile; therefore, if you are pedaling at 50 rpm,
you will "travel" approximately one mile in 8 minutes.
Displays your current speed in revolutions per minute (rpm).
When lit, this icon indicates that a device is connected via Bluetooth
iPad device is connected to the console.
(xR6xi)
When lit, this icon indicates that ANT+ wireless communications is active and detecting signal
from the optional wireless heart rate chest strap.
(xR6xi)
Displays your current heart rate percentage (current heart rate / theoretical maximum heart
rate). Note: You must have entered your age during program setup and be wearing a wireless
(xR6xi)
heart rate transmitter or consistently grasping the contact heart rate sensor grips on the
handlebars in order to get an accurate reading of Heart Rate %.
Displays heart rate in beats per minute (BPM). Note: You must be wearing a wireless heart
rate transmitter (on the xR6xi) or consistently grasping the contact heart rate sensor grips on the
stationary handlebars.
Displays the resistance level (1-20), where 1 is the lowest resistance level and 20 is the highest.
When lit, this icon indicates that M.O.M. mode (described under "Keypad Buttons") is active.
9
Mi
.
is active and a compatible
©