Dynamic Display (Lcd) - Octane Fitness Q37x Operation Manual

Dynamic Display (LCD)

The LCD display prompts you to enter important information, dynamically displays all of the important workout
data and highlights aspects of your workout such as upcoming intervals and resistance changes. Watch the
display as you set up and progress through your workout—it will guide you, motivate you, and reward you with
summary information at the end of your session.
Displays workout time, counting up from 0:00. Time can be increased or decreased during your
workout. The maximum time that users can set is 99:00. When actual workout time is displayed,
the timer goes up to 99:59, then the display rolls over to 0:00. Refer to User Set-up Functions to
learn how to switch from a "count up" to "count down" display
Displays an estimate of the total calories burned during the workout, based on the user's
entered weight. If no specific weight is entered, calories are based on a 150 lb. (68 kg) user..
Displays an estimate of the distance you have traveled. Distance can be shown in either miles
(English) or kilometers (metric). When you first purchase your elliptical the display will be in
English. Refer to User Set-up Functions to learn how to switch from English to metric. Note: On
the elliptical, 400 revolutions is approximately one mile; therefore, if you are pedaling at 50 rpm,
you will "travel" approximately one mile in 8 minutes.
Displays your current speed in revolutions per minute (rpm).
When lit, this icon indicates that Bluetooth
(Q37xi, Q47xi)
When lit, this icon indicates that ANT+
from the optional wireless heart rate chest strap.
(Q37xi, Q47xi)
Displays your stride length, the approximate horizontal distance of the elliptical pattern in
inches (English) or centimeters (metric). The stride length ranges from 18 inches (46 cm) to 26
(Q47x, Q47xi)
inches (66 cm).
When lit, this icon indicates that SmartStride is activated. As you vary your pace and direction,
SmartStride intuitively adjusts stride length in 1-inch (2-centimeter) increments to replicate
(Q47x, Q47xi)
natural movement. Press the SmartStride button on the keypad to deactivate SmartStride.
10
Mi
.
wireless communications is active.
©
wireless communications is active and detecting signal
™